Ngwaahịa
Industril sensọ 4 oyi akwa siri ike&flex pcb nwere ọla kọpa 2oz
| N'ígwé | 4 n'ígwé siri ike+2 n'ígwé mgbanwe |
| Ọkpụrụkpụ osisi | 1.60MM + 0.2mm |
| Ihe onwunwe | FR4 tg150+Polymide |
| Ọkpụkpụ ọla kọpa | 1 OZ (35um) |
| Emecha elu elu | ENIG Au ọkpụrụkpụ 1um;Ni ọkpụrụkpụ 3um |
| Oghere Min (mm) | 0.21mm |
| Ogologo Ahịrị Obere (mm) | 0.15mm |
| Oghere Ahịrị Obere (mm) | 0.15mm |
| Ihe mkpuchi solder | Akwụkwọ ndụ akwụkwọ ndụ |
| Agba Legend | Ọcha |
| Nhazi igwe | V-akara, CNC Milling(ụzọ) |
| Nkwakọ ngwaahịa | Akpa mgbochi static |
| E-ule | Nyocha na-efe efe ma ọ bụ Fixture |
| Ụkpụrụ nnabata | IPC-A-600H Klas 2 |
| Ngwa | Igwe ọkụ eletrik |
Okwu mmalite
pcbs siri ike&flex jikọtara ya na bọọdụ siri ike iji mepụta ngwaahịa ngwakọ a.Ụfọdụ n'ígwé nke usoro mmepụta gụnyere sekit na-agbanwe agbanwe nke na-agafe na bọọdụ ndị siri ike, dị ka
a ọkọlọtọ hardboard imewe.
Onye na-emepụta bọọdụ ahụ ga-agbakwunye ya site na oghere (PTHs) nke na-ejikọta sekit siri ike na mgbanwe dị ka akụkụ nke usoro a.PCB a na-ewu ewu n'ihi ọgụgụ isi ya, izi ezi, na mgbanwe ya.
PCB siri ike-Flex na-eme ka nhazi eletrọnịkị dị mfe site n'iwepụ eriri ndị na-agbanwe agbanwe, njikọ na wiwi onye ọ bụla.A na-ejikọta sekit bọọdụ siri ike & Flex nke ọma n'ime nhazi nke bọọdụ ahụ, nke na-eme ka arụmọrụ eletrik dịkwuo mma.
Ndị injinia nwere ike ịtụ anya nkwado na ịrụ ọrụ eletrik ka mma site na njikọ PCB dị n'ime ọkụ na igwe anaghị agba nchara.
Ihe onwunwe
Ngwa ala
Ihe kacha ewu ewu siri ike-ex bụ fiberglass kpara akpa.Nnukwu oyi akwa nke resin epoxy na-ekpuchi faịba glaasi a.
Ka o sina dị, fiberglass nke a na-etinye n'ime epoxy ejighị n'aka.Ọ pụghị iguzogide ujo na mberede na-adịgide adịgide.
Polyimide
A na-ahọrọ ihe a maka mgbanwe ya.Ọ siri ike ma nwee ike iguzogide mkparị na mmegharị ahụ.
Polyimide nwekwara ike idi okpomọkụ.Nke a na-eme ka ọ dị mma maka ngwa nwere mgbanwe okpomọkụ.
Polyester (PET)
A na-akwado PET maka njirimara eletrik na mgbanwe ya.Ọ na-eguzogide ọgwụ na dampness.Enwere ike were ya n'ọrụ n'ọnọdụ ụlọ ọrụ siri ike.
Iji mkpụrụ kwesịrị ekwesị na-eme ka ike na ogologo ndụ chọrọ.Ọ na-atụle ihe ndị dị ka nguzogide okpomọkụ na nkwụsi ike akụkụ mgbe ị na-ahọrọ mkpụrụ.
Polyimide adhesives
Igwe ọkụ nke okpomọkụ nke nrapado a na-eme ka ọ dị mma maka ọrụ ahụ.Ọ nwere ike iguzogide 500 ° C.Ọkụ ọkụ ya dị elu na-eme ka ọ dị mma maka ngwa dị iche iche dị oke egwu.
Polyester Adhesives
Ihe ntanye ndị a na-echekwa ọnụ ahịa karịa nke adhesives polyimide.
Ha dị mma maka ịme sekit mgbawa siri ike.
Mmekọrịta ha adịghịkwa ike.Polyester adhesives adịghịkwa eguzogide okpomọkụ.Emelitere ha n'oge na-adịbeghị anya.Nke a na-enye ha ihe mgbochi okpomọkụ.Mgbanwe a na-akwalitekwa mmegharị.Nke a na-eme ka ha dị nchebe na mgbakọ PCB multilayer.
Acrylic Adhesives
Ndị adhesives dị elu.Ha nwere ezigbo nkwụsi ike nke okpomọkụ megide corrosion na chemicals.Ha dị mfe itinye ma dịkwa ọnụ ala.Ejikọtara ya na nnweta ha, ha na-ewu ewu n'etiti ndị na-emepụta ihe.ndị na-emepụta ihe.
Epoxies
Nke a nwere ike ịbụ ihe nrapado a na-ejikarị eme ihe n'ichepụta sekit siri ike.Ha nwekwara ike iguzogide corrosion na elu na obere okpomọkụ.
Ha na-agbanwekwa nke ukwuu ma kwụsie ike nke ọma.O nwere obere polyester n'ime ya nke na-eme ka ọ dịkwuo mfe.
Nchịkọta
Nchịkọta PCB siri ike bụ otu n'ime akụkụ kachasị n'oge
nrụpụta PCB siri ike na ọ dị mgbagwoju anya karịa ọkọlọtọ
bọọdụ siri ike, ka anyị lelee ọkwa anọ nke PCB siri ike dị ka n'okpuru:
Ihe mkpuchi na-ere ihe kacha elu
N'elu oyi akwa
Dielectric 1
Igwe nrịbama 1
Dielectric 3
Igwe nrịbama 2
Dielectric 2
N'okpuru oyi akwa
Ala soldermask
PCB ike
| Ike bọọdụ siri ike | |
| Ọnụọgụ nke akwa akwa: | 1-42 n'ígwé |
| Ihe: | FR4 \ high TG FR4 \ N'efu ihe \ CEM1 \ CEM3 \ Aluminom \ Metal core \ PTFE \ Rogers |
| Out oyi akwa Cu ọkpụrụkpụ: | 1-6OZ |
| N'ime oyi akwa Cu ọkpụrụkpụ: | 1-4OZ |
| Mpaghara nhazi kachasị: | 610*1100mm |
| Ọkpụrụkpụ bọọdụ kacha nta: | 2 oyi akwa 0.3mm (12mil) 4 oyi akwa 0.4mm (16mil) 6 oyi akwa 0.8mm (32mil) 8 oyi akwa 1.0mm (40mil) 10 oyi akwa 1.1mm (44mil) 12 oyi akwa 1.3mm (52mil) 14 oyi akwa 1.5mm (59mil) 16 oyi akwa 1.6mm (63mil) |
| Obosara kacha nta: | 0.076mm (3mil) |
| Oghere kacha nta: | 0.076mm (3mil) |
| Ogo oghere kacha nta ( oghere ikpeazụ): | 0.2mm |
| Oke akụkụ: | 10:1 |
| Nha olulu mmiri: | 0.2-0.65mm |
| Nkwenye ịkwọ ụgbọ ala: | +\-0.05mm(2mil) |
| Nkwenye PTH: | Φ0.2-1.6mm +\-0.075mm (3mil) Φ1.6-6.3mm+\-0.1mm(4mil) |
| Nkwenye NPTH: | Φ0.2-1.6mm +\-0.05mm(2mil) Φ1.6-6.3mm+\-0.05mm(2mil) |
| Mechaa nnabata bọọdụ: | Ọkpụrụkpụ | 0.8mm, ndidi:+/- 0.08mm |
| 0.8mm≤Ọkpụrụkpụ≤6.5mm, ndidi+/-10% | |
| Obere akwa akwa soldermask: | 0.076mm (3mil) |
| Ntụgharị na ịgbagọ: | ≤0.75% Min0.5% |
| Ọnọdụ nke TG: | 130-215 ℃ |
| Nkwenye mgbochi: | +/-10%, Nken+/-5% |
| Ọgwụgwọ elu: | HASL, LF HASL |
| Gold imikpu, Flash Gold, mkpịsị aka ọla edo | |
| Ọlaọcha imikpu, Tin imikpu, OSP | |
| Nhọrọ ọla edo edo edo, ọkpụrụkpụ ọla edo ruru 3um(120u”) | |
| Carbon Print, S/M peelable, ENEPIG | |
| Aluminom osisi ike | |
| Ọnụọgụ nke akwa akwa: | Otu oyi akwa, okpukpu abụọ |
| Oke bọọdụ kacha: | 1500*600mm |
| Ọkpụrụkpụ osisi: | 0.5-3.0mm |
| Ọkpụkpụ ọla kọpa: | 0,5-4 oz |
| Ogo oghere kacha nta: | 0.8mm |
| Obosara kacha nta: | 0.1mm |
| Oghere kacha nta: | 0.12mm |
| Oke mpe mpe akwa: | 10 micron |
| Mmecha elu: | HASL, OSP, ENIG |
| Nhazi: | CNC, Punching, V-ịkpụ |
| Akụrụngwa: | Nnwale zuru ụwa ọnụ |
| Ihe nleba anya na-efe efe mepere emepe/obere nwale | |
| Microscope ike dị elu | |
| Ngwa ihe nlebanya nlebara anya | |
| Nleta ike bee | |
| High Volt Open & Mkpirisi ihe nnwale | |
| Ngwa ihe eji akpụzi akụkụ obe na Polisher | |
| Ike FPC | |
| N'ígwé: | 1-8 n'ígwé |
| Ọkpụrụkpụ osisi: | 0.05-0.5mm |
| Ọkpụkpụ ọla kọpa: | 0,5-3OZ |
| Obosara kacha nta: | 0.075 mm |
| Oghere kacha nta: | 0.075 mm |
| N'ime nha oghere: | 0.2mm |
| Nha oghere laser kacha nta: | 0.075 mm |
| Nha oghere ịkụ ọkpọ kacha nta: | 0.5mm |
| Nkwenye soldermask: | +\-0.5mm |
| Opekempe nfefe akụkụ ụzọ: | +\-0.5mm |
| Mmecha elu: | HASL,LF HASL, Silver imikpu, ọla edo imikpu,Flash Gold,OSP |
| Nhazi: | Punching, Laser, bee |
| Akụrụngwa: | Nnwale zuru ụwa ọnụ |
| Ihe nleba anya na-efe efe mepere emepe/obere nwale | |
| Microscope ike dị elu | |
| Ngwa ihe nlebanya nlebara anya | |
| Nleta ike bee | |
| High Volt Open & Mkpirisi ihe nnwale | |
| Ngwa ihe eji akpụzi akụkụ obe na Polisher | |
| Ike siri ike&mgbanwe | |
| N'ígwé: | 1-28 n'ígwé |
| Ụdị ihe: | FR-4 (Tg dị elu, Halogen efu, ugboro dị elu) PTFE, BT, Getek, Aluminom base, ọla kọpa, KB, Nanya, Shengyi, ITEQ, ILM, Isola, Nelco, Rogers, Arlon |
| Ọkpụrụkpụ osisi: | 6-240mil / 0.15-6.0mm |
| Ọkpụkpụ ọla kọpa: | 210um (6oz) n'ime oyi akwa 210um (6oz) maka elu oyi akwa |
| Nha mịrọnịịlụ mini: | 0.2mm/0.08" |
| Oke akụkụ: | 2:1 |
| Nha panel kacha: | Sigle akụkụ ma ọ bụ abụọ n'akụkụ: 500mm * 1200mm |
| Multilayer n'ígwé: 508mm x 610mm (20 ″ X 24″) | |
| Obosara/ oghere obere ahịrị: | 0.076mm / 0.076mm (0.003 ″ / 0.003″)/ 3mil/3mil |
| Site n'ụdị oghere: | Onye kpuru ìsì / lie / Plugged (VOP, VIP…) |
| HDI / Microvia: | EE |
| Mmecha elu: | HASL, LF HASL |
| Gold imikpu, Flash Gold, mkpịsị aka ọla edo | |
| Ọlaọcha imikpu, Tin imikpu, OSP | |
| Nhọrọ ọla edo edo edo, ọkpụrụkpụ ọla edo ruru 3um(120u”) | |
| Carbon Print, S/M peelable, ENEPIG | |
| Nhazi: | CNC, Punching, V-ịkpụ |
| Akụrụngwa: | Nnwale zuru ụwa ọnụ |
| Ihe nleba anya na-efe efe mepere emepe/obere nwale | |
| Microscope ike dị elu | |
| Ngwa ihe nlebanya nlebara anya | |
| Nleta ike bee | |
| High Volt Open & Mkpirisi ihe nnwale | |
| Ngwa ihe eji akpụzi akụkụ obe na Polisher | |
