Ike nnyefe
| Ike bọọdụ siri ike | |
| Ọnụọgụ nke akwa akwa: | 1-42 n'ígwé |
| Ihe: | FR4 \ high TG FR4 \ N'efu ihe \ CEM1 \ CEM3 \ Aluminom \ Metal core \ PTFE \ Rogers |
| Out oyi akwa Cu ọkpụrụkpụ: | 1-6OZ |
| N'ime oyi akwa Cu ọkpụrụkpụ: | 1-4OZ |
| Mpaghara nhazi kachasị: | 610*1100mm |
| Ọkpụrụkpụ bọọdụ kacha nta: | 2 oyi akwa 0.3mm (12mil) 4 oyi akwa 0.4mm (16mil) 6 oyi akwa 0.8mm (32mil) 8 oyi akwa 1.0mm (40mil) 10 oyi akwa 1.1mm (44mil) 12 oyi akwa 1.3mm (52mil) 14 oyi akwa 1.5mm (59mil) 16 oyi akwa 1.6mm (63mil) |
| Obosara kacha nta: | 0.076mm (3mil) |
| Oghere kacha nta: | 0.076mm (3mil) |
| Ogo oghere kacha nta ( oghere ikpeazụ): | 0.2mm |
| Oke akụkụ: | 10:1 |
| Nha olulu mmiri: | 0.2-0.65mm |
| Nkwenye ịkwọ ụgbọ ala: | +\-0.05mm(2mil) |
| Nkwenye PTH: | Φ0.2-1.6mm +\-0.075mm (3mil) Φ1.6-6.3mm+\-0.1mm(4mil) |
| Nkwenye NPTH: | Φ0.2-1.6mm +\-0.05mm(2mil) Φ1.6-6.3mm+\-0.05mm(2mil) |
| Mechaa nnabata bọọdụ: | Ọkpụrụkpụ | 0.8mm, ndidi:+/- 0.08mm |
| 0.8mm≤Ọkpụrụkpụ≤6.5mm, ndidi+/-10% | |
| Obere akwa akwa soldermask: | 0.076mm (3mil) |
| Ntụgharị na ịgbagọ: | ≤0.75% Min0.5% |
| Ọnọdụ nke TG: | 130-215 ℃ |
| Nkwenye mgbochi: | +/-10%, Nken+/-5% |
| Ọgwụgwọ elu:
| HASL, LF HASL |
| Gold imikpu, Flash Gold, mkpịsị aka ọla edo | |
| Ọlaọcha imikpu, Tin imikpu, OSP | |
| Nhọrọ ọla edo edo edo, ọkpụrụkpụ ọla edo ruru 3um(120u”) | |
| Carbon Print, S/M peelable, ENEPIG | |
| Aluminom osisi ike | |
| Ọnụọgụ nke akwa akwa: | Otu oyi akwa, okpukpu abụọ |
| Oke bọọdụ kacha: | 1500*600mm |
| Ọkpụrụkpụ osisi: | 0.5-3.0mm |
| Ọkpụkpụ ọla kọpa: | 0,5-4 oz |
| Ogo oghere kacha nta: | 0.8mm |
| Obosara kacha nta: | 0.1mm |
| Oghere kacha nta: | 0.12mm |
| Oke mpe mpe akwa: | 10 micron |
| Mmecha elu: | HASL, OSP, ENIG |
| Nhazi: | CNC, Punching, V-ịkpụ |
| Akụrụngwa: | Nnwale zuru ụwa ọnụ |
| Ihe nleba anya na-efe efe mepere emepe/obere nwale | |
| Microscope ike dị elu | |
| Ngwa ihe nlebanya nlebara anya | |
| Nleta ike bee | |
| High Volt Open & Mkpirisi ihe nnwale | |
| Ngwa ihe eji akpụzi akụkụ obe na Polisher | |
| Ike FPC | |
| N'ígwé: | 1-8 n'ígwé |
| Ọkpụrụkpụ osisi: | 0.05-0.5mm |
| Ọkpụkpụ ọla kọpa: | 0,5-3OZ |
| Obosara kacha nta: | 0.075 mm |
| Oghere kacha nta: | 0.075 mm |
| N'ime nha oghere: | 0.2mm |
| Nha oghere laser kacha nta: | 0.075 mm |
| Nha oghere ịkụ ọkpọ kacha nta: | 0.5mm |
| Nkwenye soldermask: | +\-0.5mm |
| Opekempe nfefe akụkụ ụzọ: | +\-0.5mm |
| Mmecha elu: | HASL,LF HASL, Silver imikpu, ọla edo imikpu,Flash Gold,OSP |
| Nhazi: | Punching, Laser, bee |
| Akụrụngwa: | Nnwale zuru ụwa ọnụ |
| Ihe nleba anya na-efe efe mepere emepe/obere nwale | |
| Microscope ike dị elu | |
| Ngwa ihe nlebanya nlebara anya | |
| Nleta ike bee | |
| High Volt Open & Mkpirisi ihe nnwale | |
| Ngwa ihe eji akpụzi akụkụ obe na Polisher | |
| Ike siri ike&mgbanwe | |
| N'ígwé: | 1-28 n'ígwé |
| Ụdị ihe: | FR-4 (Tg dị elu, Halogen efu, ugboro dị elu) PTFE, BT, Getek, Aluminom base, ọla kọpa, KB, Nanya, Shengyi, ITEQ, ILM, Isola, Nelco, Rogers, Arlon |
| Ọkpụrụkpụ osisi: | 6-240mil / 0.15-6.0mm |
| Ọkpụkpụ ọla kọpa: | 210um (6oz) n'ime oyi akwa 210um (6oz) maka elu oyi akwa |
| Nha mịrọnịịlụ mini: | 0.2mm/0.08" |
| Oke akụkụ: | 2:1 |
| Nha panel kacha: | Sigle akụkụ ma ọ bụ abụọ n'akụkụ: 500mm * 1200mm |
| Multilayer n'ígwé: 508mm x 610mm (20 ″ X 24″) | |
| Obosara/ oghere obere ahịrị: | 0.076mm / 0.076mm (0.003 ″ / 0.003″)/ 3mil/3mil |
| Site n'ụdị oghere: | Onye kpuru ìsì / lie / Plugged (VOP, VIP…) |
| HDI / Microvia: | EE |
| Mmecha elu: | HASL, LF HASL |
| Gold imikpu, Flash Gold, mkpịsị aka ọla edo | |
| Ọlaọcha imikpu, Tin imikpu, OSP | |
| Nhọrọ ọla edo edo edo, ọkpụrụkpụ ọla edo ruru 3um(120u”) | |
| Carbon Print, S/M peelable, ENEPIG | |
| Nhazi: | CNC, Punching, V-ịkpụ |
| Akụrụngwa: | Nnwale zuru ụwa ọnụ |
| Ihe nleba anya na-efe efe mepere emepe/obere nwale | |
| Microscope ike dị elu | |
| Ngwa ihe nlebanya nlebara anya | |
| Nleta ike bee | |
| High Volt Open & Mkpirisi ihe nnwale | |
| Ngwa ihe eji akpụzi akụkụ obe na Polisher | |
